China CCC Mark Application-Low Power Motor Products

China CCC Mark Application-Low Power Motor Products

This regulation applies to low power driven motor,rated voltage is over 36V (not including 36V),below DC1500V,AC1000V,including:
⑴ All categories of AC asynchronous and synchronous motor,rotating speed is1500r/min,max. continuous rating is below 1.1kw.
⑵ AC commutator motor and DC motor,max.continuous rating is below 1.1kw.
Notes:1.Rated power≤synchronous speed×1.1kw/1500.
2.Not including explosion-proof and control motor (servomotor,step motor,autosynchromotor, rotating transformer,speed generator,induction phase shifter,etc.).
3.It doesn't apply to multi voltage and rotating speed motor with one rating over above range.
Unit should be divided as following:
1) Y series (IP44) three phase asynchronous motor
2) YD series (IP44) pole-changing multi-speed three phase asynchronous motor
3) YZC series (IP44) low noise three phase asynchronous motor
4) YH series (IP44) high slip three phase asynchronous motor
5) YCT series electromagnetism timing motor
6) YCTD series electromagnetism timing motor
7) YCJ series gear reduction three phase asynchronous motor
8) Y2 series (IP54) three phase asynchronous motor
9) Y2E series (IP54) three phase asynchronous motor
10) YDT series (IP44) pole-changing multi-speed three phase asynchronous motor
11) YEP series (IP44) side-magnetism brake three phase asynchronous motor
12) YEJ series (IP44) electromagnetism brake three phase asynchronous motor
13) Y-W and Y-WF series outdoor and outdoor corrosion three phase asynchronous motor
14) Y-F series anti-corrosion three phase asynchronous motor
15) Y-M series three phase asynchronous motor for woodworker
16) Vibration source three phase asynchronous motor
17) YLJ series moment three phase asynchronous motor
18) CK series three phase asynchronous motor
19) Small VVVF motor
20) Small plane brake three phase asynchronous motor
21) YDF2 series three phase asynchronous motor for electric valve device
Application unit of low power moter for other series which is not included may refer to similar product in this catalogue.
1) Three phase asynchronous motor (YS series)
2) Resistance starting asynchronous motor (YU series)
3) Capacitor starting asynchronous motor (YC series)
4) Capacitor operating asynchronous motor (YY series)
5) Two-value capacitor asynchronous motor (YL series)
6) Shaded pole asynchronous motor (numbers of unit according to structure and function)
7) Three phase electric pump
8) Three phase disk brake asynchronous motor
9) Single phase series motor (numbers of unit according to structure and function)
10) Three phase clutch motor
11) Single phase clutch motor
12) Motor for water pump (numbers of unit according to structure and function)
13) Motor for household sewing machine
14) Motor for wash machine (numbers of unit according to structure and function)
15) Motor for dewatering device of wash machine
16) Motor for fan of air-conditioner (numbers of unit according to structure and function)
17) AC Motor for desk fan (including same structure motor of wall fan,floor fan)
18) Motor for rotating fan
19) Motor for ventilator
20) Motor for household ventilator
21) Series motor for food mixer
22) Single phase series motor for household vacuum cleaner-fan
23) Permanent synmotor (numbers of unit according to structure and function)
24) Claw-pole permanent synmotor
25) DC motor (numbers of unit according to structure and function)
26) Sealant motor of all functions (numbers of unit according to structure and function)
27) All motors of all regulated functions
Application unit dividing method above is the general method,which may properly be adjusted when implementing according to structure,specification and function of the product.
Regulation of China CCC Mark use:CCC certificate holder should conform to regulation for Compulsory Certification China CCC Mark Management Rules:http://china-ccc-certification.com/77.html
Admitted use of China CCC Mark:CCCs
Use of deformed China CCC Mark:any form of deformed China CCC Mark cannot be processed in covered products of this rule.
Mark process:may use any form of uniformly printed standard specification certification mark, molding or nameplate printing.
Mark position:the certification mark should be processed at obvious position on the body of product.
Regulation of mark charge:uniformly charged by China CCC Mark grant and manage administration according to related regulations.Details see notice of mark charge.

CCC certification holder should apply for self-printing/impressing China CCC Mark according to following procedures:
1) Fill in 'Application Form for Printing/Impressing China CCC Mark':http://china-ccc-certification.com/167.html (Form I and II) with the seal of applicant.
2) Offer CCC certification copy of product that has processed China CCC Mark.
3) Offer nameplate sample with China CCC Mark pattern and factory code and product type.
4) Offer product design proposal with China CCC Mark pattern and information including factory code, information and product type.
5) China CCC Mark grant and manage administration should approve design proposal application of printing/impressing submitted by applicant according to following:
⑴ The form and content of nameplate should be same as sample submitted by applicant.
⑵ The pattern of China CCC Mark should be in linear proportion to dimension of standard specification certification mark.Its bottom and color of pattern may properly be chosen according to product outline and whole drawing of nameplate.
⑶ Product related factory code should be below China CCC Mark.China CCC Mark grant and manage administration will notify applicant to correct design proposal if it doesn't meet requirements.
6) China CCC Mark grant and manage administration will send notice of mark charge by post if it meets requirements.
7) China CCC Mark grant and manage administration will send Notification of Printing/Impressing China CCC Mark Permission to applicant after making the confirmation of all payments(enter the certain account).
8) Applicant may apply correcting printing/impressing application to China CCC Mark grant and manage administration,which will be accepted as new application.
Printing and Impressing China CCC Mark Application link:http://china-ccc-certification.com/156.html
Contact way of printing/impressing application: Tel: 8621-51095580-805; Fax: 8621-51095580-807.

CCC certificate holder should apply purchasing China CCC Mark according to following:
1.Enterprise may purchase China CCC Mark if it has CCC certificate or clear copy of CCC certificate,and its status is valid.
2.The status of CCC certificate should be valid.Applicant cannot purchase China CCC Mark temporarily if the status is stop, cancel or invalid.Note:applicant may purchase China CCC Mark if the reason of certificate stop is not purchase China CCC Mark.
3.Applicant should be full name of enterprise or certificate holder rather than person,refer to certificate.If applicant is not the owner of certificate holder,he should submit Trust Deed:http://china-ccc-certification.com/365.html authorized by applicant of certificate.
4.Type of China CCC Mark:S,EMC,S&E,F,I and no type.Refer to national standard GB and implement rules of compulsory product certification,or contact us.
5.Size of China CCC Mark:6 kinds of standard specification mark:8mm,15mm,30mm,45mm,60mm and 60mm reverse).Charge standard:http://china-ccc-certification.com/157.html.Besides less products,in most case,there is not rules for the size of China CCC Mark on the product.It will be rectified if the size does not meet requirements.
6.Fill in 'Application Form for Purchasing China CCC Mark':http://china-ccc-certification.com/148.html Minimum quantity is 1 plate.Type of China CCC Mark should be related to product.(According to compulsory product catalogue,if digits 7th to 10th of products CCC certificate number are the same,can be treated as same categorized product,can purchase same type of China CCC Mark.)
7.Product name in the application form should be the product related to CCC certificate,the product should be according to content of CCC certificate.
8.Applicant may add pages if he has many certificates to purchase China CCC Mark.
9.Form of fax:Country-Region-Tel-Ext
Link of Application Form for Purchasing China CCC Mark:http://china-ccc-certification.com/148.html
10.Applicant in China should seal on the application form.Applicant who is not the applicant of the certificate should have Trust Deed:http://china-ccc-certification.com/365.html with the seal of applicant authorized by applicant of certificate,the authorized part can purchase China CCC Mark.
All rules above should be implemented according to Compulsory Certification Mark Management Rules.
Link of Compulsory Certification China CCC Mark Management Rules:http://china-ccc-certification.com/77.html
Contact way of China CCC Mark application:Tel:8621-51095580-805;Fax:8621-51095580-807.

Process of Purchasing China CCC mark:http://china-ccc-certification.com/155.html