Implementation Rules-Retro-reflector for Motor Vehicles

No. CNCA-02C-056: 2005

Implementation Rules for Compulsory Certification of Motor Vehicle Products
Retro-reflector for Motor Vehicles
Issued on Oct 10th 2005 Effective on Dec 1st 2005
Issued by the Certification and Accreditation Administration of PRC

1. Scope
This rule applies to various kinds of retro-reflector used for motorcycles, mopeds, motor vehicles and trailers
2. Certification mode
Type tests + initial factory inspection + supervision after inspection
3. Basic procedure of the certification
3.1 Commission and acceptance of the certification(http://china-ccc-certification.com/171.html)
3.2 Type tests
3.3 Initial factory inspection
3.4 Evaluation of certification results and approval of certification
3.5 Supervision after inspection (sampling)
4. Basic requirements of the certification
4.1 Commission and acceptance of the certification
4.1.1 Principle for unit classification
In principle, the retro-reflector products of the same function produced by the same manufacturer and having no difference in the following aspects could be classified as one certification unit.
1) Class of retro-reflector
2) Optical unit.
4.1.2 Documents and Materials Needed for Certification can be refereed to Appendix 1.
4.2 Type tests
4.2.1 Sampling for type tests
4.2.1.1 Principles for sampling
As for one unit to be certified, if there is only one type of products, this type should be sampled.
As for one unit to be certified, if there is more than one type of products, the representative sample should be selected by the certification body. Once needed, the other types should be sampled to conduct the discrepancy tests.
4.2.1.2 Amount of samples to be submitted
10 samples and extra 2 samples for each other color in the case of the retro-reflector of same type with more than one color.
4.2.1.3 Disposal of the samples used for type tests and the relevant documents
After the test, certificated samples and relevant materials must be disposed in a suitable way.
4.2.2 Test items and test specification
For the test items and test specifications, please refer to attachment 2.
4.3 Initial factory inspection
4.3.1 Time for initial factory inspection
Generally speaking, once the products have passed type tests, initial factory inspection can be conducted.
The time for initial factory inspection will be decided according to the application units and the amounts of products covered by the models, and as well the considerations should be given to the production scale of the factories. Usually each factory will need 2 to 4 person/days.
4.3.2 Inspection contents
It covers the inspections on the quality assurance abilities of the factory and the inspections on its' product consistency.
4.3.2.1 Inspections on the quality assurance abilities of the factory
The Requirements on the Quality Assurance Abilities of the Factories for Compulsory Certification (refer to Appendix 3) are the basic requirements used in initial factory inspection on quality assurance abilities for products covered in this rule.
4.3.2.2 Inspection on product consistency
During the factory inspection, the consistency of entrusted products must be checked, which includes:
1) The markings of the certified products (such as name, specification, model and trademark etc) should be consistent with those stated in the documents submitted for the commission and acceptance
2) The structures of certified products should be consistent with those of samples and those stated in documents submitted for the commission and acceptance;
3) The key components of certified products should be consistent with those of samples and those states in documents submitted for the commission and acceptance;
4) The designated on-site tests: the test items should be selected from the routine tests or verification tests (refer to the Appendix 3);
If there will be any problem in the inspection on product consistency, the certified body should give the measures for reform and consolidation、re-type test or breaking down this certification according to the situation.
4.3.3The inspections on the quality assurance abilities of factory should cover the processing workshops that produce the certified products, and the inspections on product consistency should cover the certified products.
4.4 Evaluation of certification results and approval of certification
4.4.1 Evaluation of certification results and approval of certification
Certification body will make a comprehensive evaluation to the type tests and factory inspection results. With the approval of the certification body, the certificate will be granted to the applicant (one certificate for one unit). The usage of the certificate should meet the requirements specified by the Administration Rule for Compulsory Certification.
If the type tests of the certified products can not meet the requirements, a deadline (not more than 3 months) will be given for making the improvements, if the improvement can be finished timely, the re-tests can be applied; as for the disqualified factory inspection, a deadline (not more than 3 months) will be given for making the improvements, the certification body will confirm the results in a suitable way. As for those products that have passed re-examinations of the type tests and factory inspection, the certificate will be granted after the certification body has confirmed the results; as for the products that could not be improved within the time limit or that are still disqualified after the improvements are made, this certification will be terminated.
4.4.2 Time limit for the certification
The time for certification is calculated from the date when the commission of the certification is accepted to the date when the certificate is issued, including the time for type tests, factory inspection, evaluation and approval of the certification results, and the time for preparing the certificate.
The time for type tests will not exceed 20 working days, which is calculated from the date when samples are delivered to the designated test institution.
Normally, there are 5 working days for providing the Inspection Report. It should be calculated from the date when the inspector finishes the inspection and receives the report for the corrective action regarding the disqualification from the manufacturer.
There will be not more than 5 working days for evaluating & approving the certification results and preparing the certificate.
4.5 Supervision after inspection
4.5.1 Frequency of the supervision
4.5.1.1 Generally speaking, the first supervision will be made in the 12th months after the certificate granted. Afterwards, there will be at least one supervision once a year.
4.5.1.2 There will be a decrease of frequency for the supervision when one of the following situations occurs, but at least once a year.
1) Supplying the complete vehicle manufacturer, and the complete vehicle manufacturer is qualified for the second party evaluation; furthermore there is no safety problem of the certified products in the last two years, and as well there are no non-consistency problems during all the follow-up inspections.
2) When the certified product don't have the safety and quality problems in the last two years; and as well there are no non-consistency problems during all the follow-up inspections; no problems appear during the mandatory inspection for certification and the national supervision inspection by samples; and further more the certification body has enough reasons to judge the certified products satisfying the requirements.
4.5.1.3 There will be an increase of the frequency for the supervision when one of the following situations occurs.
1) Serious quality problems in the certificated products occurs, or the responsibilities of the certificate holder are confirmed after the consumer complains.
2) The certification body has enough reasons to question the consistency between the certificated products and the requirements specified by this rule.
3) There is enough information showing that the compliance and consistency of the certified products may be influenced by the changes in terms of the organization, the working condition as well as quality assurance system in the manufacturer.
4.5.2 Content of the supervision
The supervision mode after granting the certificate should include: rechecking of the quality assurance abilities of the factory+ checking the consistency of the certificated product + random samples tests.
4.5.2.1 Rechecking of the quality assurance abilities of the factory
It is the certification body to conduct the rechecks of the factory according to the Requirements on the Quality Assurance Abilities of the Factories for Compulsory Certification. Items 3, 4, 5, 9, which specified in the Requirements on the Quality Assurance Abilities of the Factories for Compulsory Certification must be checked for every supervision, the other items can be checked selectively. Every four years, all the items must be covered.
Normally, the supervision will take 1 to 2 man-day for each factory.
4.5.2.2 Checking of the consistency of the certificated products
During supervision, the on-site consistency inspection to the certified products should be conducted. Refer to the item 4.3.2.2 for the details.
4.5.2.3 Sample tests of the certified products
1) Sampling
Sampling should be conducted during the supervision. Samples should be taken randomly from the qualified products (including the products on the production line and in the warehouse) produced by the factory. 6 samples with the same model could be taken for each unit selected.
2) Tests
The designated test institution will undertake the sample tests. Sample test items are specified by item 1,2. and 4 in attachment 2 of this rule.
4.5.3 The evaluation of the supervision results after granting the certificate
After the evaluation by the certification body, the certificate qualification and certificate marks can be retained continuously for the satisfactory results. If there is any disqualification on the product itself, the certificate will be withdrawn according to the situation, and the usage of the marks will be stopped, and the notification of such withdrawal will be made public. For those that disqualified on the quality assurance abilities, the correction actions should be taken and finished within three months. Otherwise, the certificate and marks will be withdrawn and stopped, and the notification of such withdrawal will be made public.
5. Certificate
5.1 Validity of the certificate
The certificate of the products covered by this rule will not stipulate the deadline of the validity in principle. The validity of the certificate depends on the regular supervision of the certification body.
5.2 Modifications of the certificate(http://china-ccc-certification.com/225.html)
For the certificate of the products covered by this rule, if any of the following changes occurs, an application for the modifications should be submitted to the certification body:
1) Increase/decrease the certified products of the same unit
2) There is any change on the key parts/components, raw materials, structure, manufacturing process and suppliers of the certified products.
3) There is any change of the certified products on the trademark, applicant, manufacturer or factory information (names and/or address, quality assurance system).
4) Other changes that might influence the certification requirements.
The certification body should review and confirm the above changes and confirm the validity of the original certification results to the changes. If necessary, it should conduct the additional tests or inspections on the quality assurance system of the factory, and confirm that the original certificate remains in validity and/or re-issue a new certificate.
5.3 Suspension, cancellation and withdrawal of the certificate
The suspension, cancellation and withdrawal of the certificate should be implemented in accordance with the Administration Rule for the Product Compulsory Certification. During the suspension period and after the cancellation and withdrawal, the products should not be delivered out of the factory or imported.
6. Usage of the compulsory certification marks
The holder of the certificate should obey the relevant requirements of the Administration Rule for the Product Compulsory Certification Markings.
6.1 Mark design allowed to be used
6.2 Mark application and its location
The certification mark should be on a suitable place of the main part of the component, and make sure that this marking can be easily witnessed after the component is fixed on the car.
If the printed(http://china-ccc-certification.com/167.html) or molded mark is used, the manufacture code must be printed on a suitable place around the mark. The usage method of the mark should be submitted to the CNCA authorized administration department for CCC marking for a review and approval.
7. Charge
The CCC charge should include the fees for application, product tests, factory inspection, approval and registration (including the fees for the certificate), and the fees for the supervisions and re-checks, annuity and certificate marks, etc. It is the Certificate Body that imposing the charge according to the relevant government regulations.